Setting up network printing
–
NDS Context Name: Specify the name of the context that connects to the PServer.
–
NDS Tree Name: Specify the name of the tree that PServer logs on to.
7
Touch [Close].
8
In the NetWare Settings screen, touch [User Authentication Setting (NDS)], and then specify settings for
the following. After specifying the settings, touch [Close].
–
User Authentication Setting (NDS): Select [ON]. (Depending on the network environment, select
[OFF].)
9
In the NetWare Settings screen, touch [Close].
10
Restart this machine (turn the main power off, then on again).
11
Use the NetWare server console to load MONITOR.NLM.
12
Select the connection information and, in the active connection column, check that the created PServer
is connected.
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.
cm6520
3
3-19