Oce cm6520 User Manual page 57

3
5
Specify settings for the following. After specifying the settings, touch [Close].
– Print Server Name: Specify the Print Server Name.
– Printer Number: Specify the printer number (0 to 254), or select [Auto].
6
Touch [Close].
7
In the NetWare Settings screen, touch [User Authentication Setting (NDS)], and then specify settings for
the following. After specifying the settings, touch [Close].
– User Authentication Setting (NDS): Select [ON]. (Depending on the network environment, select
[OFF].)
8
In the NetWare Settings screen, touch [Close].
9
Restart this machine (turn the main power off, then on again).
10
Use the NetWare server console to display the print server screen, and then check that the created
printer is shown as "Waiting for Job" for the connected printer (0).
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.
3-16
Setting up network printing
cm6520