Table Of Contents - Branson Sonifier SLPt User Manual

SLPt Cell Disruptor
User Manual
Chapter 1: Safety and Support
1.1
1.2
1.2.1
1.2.2
1.2.3
1.2.4
1.3
1.4
1.5
1.5.1
Chapter 2: Introduction to the SLPt Cell Disruptor
2.1
2.2
2.2.1
2.2.2
2.3
Chapter 3: Delivery and Handling
3.1
Chapter 4: Installation and Setup
4.1
4.2
4.3
4.3.1
4.3.2
4.4
4.4.1
4.4.2
4.5
4.6
100-214-252 Rev. A
DOC EXPIRES 12PM 9/16/2007. Article or Material must comply with the requirements
stipulated by RoHS in its current version of 1/27/03

Table of Contents

Safety Considerations - - - - - - - - - - - - - - - - - - - - - - - - - -1 - 1
General Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - -1 - 2
Intended Use of the System - - - - - - - - - - - - - - - - - - - - - -1 - 2
Safety Measures and Guards - - - - - - - - - - - - - - - - - - - - - -1 - 2
Safe Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 - 3
Setting Up the Workplace- - - - - - - - - - - - - - - - - - - - - - - -1 - 3
Regulatory Compliance - - - - - - - - - - - - - - - - - - - - - - - - - -1 - 4
Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 - 5
How to Contact Branson - - - - - - - - - - - - - - - - - - - - - - - - -1 - 6
Before Calling Branson for Assistance - - - - - - - - - - - - - - - - -1 - 6
Overview of SLPt Cell Disruptor - - - - - - - - - - - - - - - - - - - - -2 - 1
Controls and Commands - - - - - - - - - - - - - - - - - - - - - - - - -2 - 2
SLPt Cell Disruptor Keypad/Display Description - - - - - - - - - - - - -2 - 4
Back Panel Connections - - - - - - - - - - - - - - - - - - - - - - - -2 - 5
System Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2 - 6
Delivery and Handling - - - - - - - - - - - - - - - - - - - - - - - - - -3 - 1
Installation Checklist - - - - - - - - - - - - - - - - - - - - - - - - - - -4 - 1
System Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - -4 - 2
System Component Description - - - - - - - - - - - - - - - - - - - - -4 - 2
Standard Components - - - - - - - - - - - - - - - - - - - - - - - - -4 - 2
Tools- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 - 3
Assembling the Equipment - - - - - - - - - - - - - - - - - - - - - - - -4 - 6
Setup Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 - 6
Connecting Microtips, and Converters - - - - - - - - - - - - - - - - -4 - 7
Input Power Requirements - - - - - - - - - - - - - - - - - - - - - - - -4 - 8
Electrical Connections to Equipment - - - - - - - - - - - - - - - - - - -4 - 8
-1