Table of Contents
Advertisement
Chapter 1: Safety and Support
Regulatory Compliance
1.3 Regulatory Compliance
The SLPt Cell Disruptor is designed for compliance with the following regulatory guidelines.
• Code of Federal Regulations, Title 29 Part 1910
• UL61010-A-1
• CSA22.2#1010.1
• European norms EN-61010-1, EN55011, EN61326+A1, EN61000-3-2, EN61000-3-3, EN61000-4-3,
EN61000-4-5, EN61000-4-6, EN61000-4-11, IEC61000-4-2+A1, IEC61000-4-4.
Following the provision of: Low Voltage Directive 73/23/EEC amended by directive 93/68/EEC; EMC
Directive 89/336/EEC amended by directive 91/263/EEC, 92/31/EEC and 93/68EEC.
• FCC part 18
• IEC 529 (IP-65 water resistant for Membrane Keypad)
The SLPt Cell Disruptor is CE compliant.
1-4
DOC EXPIRES 12PM 9/16/2007. Article or Material must comply with the requirements
stipulated by RoHS in its current version of 1/27/03
100-214-252 Rev. A
Advertisement
Table of Contents
Troubleshooting
