Tools - Branson Sonifier SLPt User Manual

SLPt Cell Disruptor
User Manual
Table 4.1 System Part Numbers
Item
Converter, 4C
RF Cable
Tool Kit

4.3.2 Tools

Three sizes of microtips are available for use with Sonifier SLPt units.
While other tools may be available for use with the SLPt Cell Disruptors, the primary tool is a microtip.
Microtips are useful for processing smaller volumes, particularly where higher amplitudes are required.
Three sizes are available for use with SLPt units to meet specific application needs.
Figure 4.1 Tapered Microtip,
* requires another spanner wrench (P/N 201-118-024) in addition to the one supplied in the tool kit.
3/32" Microtip
P/N 109-122-1066
CAUTION
!
DO NOT allow the horn or microtip to contact lab stands, beakers, test tubes or similar
objects. Microtip failure may result. Breakage of glassware may result in the loss of a speci-
men.
100-214-252 Rev. A
DOC EXPIRES 12PM 9/16/2007. Article or Material must comply with the requirements
stipulated by RoHS in its current version of 1/27/03
Part Number
101-135-126
N/A (attached)
101-063-176
1/8" Microtip
P/N 109-122-1065
Chapter 4: Installation and Setup
System Component Description
3/16" Microtip* 1/4" Microtip*
P/N 109-122-1182 P/N 109-122-1064
4-3