Branson Sonifier SLPt User Manual page 2

100-214-252 Rev. A
DOC EXPIRES 12PM 9/16/2007. Article or Material must comply with the requirements
stipulated by RoHS in its current version of 1/27/03
Manual Change Information
At Branson, we strive to maintain our position as the leader in ultrasonics plastics joining,
cleaning and related technologies by continually improving the designs, circuits and com-
ponents in our equipment. These improvements are incorporated as soon as they are devel-
oped and thoroughly tested.
Information concerning any improvements will be added to the appropriate technical doc-
umentation at its next revision and printing. Therefore, when requesting service assistance
for specific units, note the Release information found on the cover of this document, and
refer to the printing date which appears in the lower right corner of this page.
Patents and Copyright
Copyright © 2003 by Branson Ultrasonics Corporation, Danbury, Connecticut, U.S.A.
All rights reserved.
Manual part number: EDP 100-214-252, Initial Release printed August 2003.
Branson Ultrasonics Corporation equipment is manufactured under one or more of the fol-
lowing U. S. Patents:
4,249,986; 4,315,181; 4,363,992; 4,551,690; 4,651,043; 4,786,356; 4,973,876; 5,095,188;
5,435,863.
®
Note: Sonifier is a registered trademark of Branson Ultrasonics Corporation, Danbury,
Connecticut, U.S.A. Other trademarks and service marks respectfully mentioned herein are
held by their respective owners.
April 2004