SLPt Cell Disruptor
User Manual
Chapter 6: Operation
6.1
6.1.1
6.1.2
6.2
6.3
6.3.1
6.3.2
6.3.3
6.4
6.4.1
6.4.2
6.4.3
6.5
6.1 Front Panel Controls
6.1.1 Power Switch
The Power switch for the system is located on the front lower right of the units. It is a simple rocker switch,
on/off operation. When turned on, the front panel LED will light (during the power-up sequence), and the
unit's fan will run.
100-214-252 Rev. A
DOC EXPIRES 12PM 9/16/2007. Article or Material must comply with the requirements
stipulated by RoHS in its current version of 1/27/03
Power Switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 - 2
System Modes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 - 5
Menu Navigation - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 - 5
Control Menu- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 - 6
Alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 - 10
Chapter 6: Operation
Front Panel Controls
6-1