Chapter 5: Technical Specifications; Technical Specifications - Branson Sonifier SLPt User Manual

SLPt Cell Disruptor
User Manual

Chapter 5: Technical Specifications

5.1
5.2
5.3

5.1 Technical Specifications

The following table outlines the technical specifications for the Digital Sonifier:
Controls and Dislpay,
Front Panel
Duty Cycle
Horn Frequency
Line Voltage
Max Output Power
Temperature
(ambient)
Tuning
AC Mains Fuse
Voltage/Current @ 150W
* Amplitude control at maximum setting. (System settings are covered in Chapter 6.)
100-214-252 Rev. A
DOC EXPIRES 12PM 9/16/2007. Article or Material must comply with the requirements
stipulated by RoHS in its current version of 1/27/03
Technical Specifications - - - - - - - - - - - - - - - - - - - 5-1
Physical Description - - - - - - - - - - - - - - - - - - - - - 5-2
System Performance Benchmark - - - - - - - - - - - - - - - 5-3
4 digit numeric display with provisions to set mode (Continuous,
Time, , Time Pulse, ), operating parameters (Amplitude,Time
On, Time Pulse,), and perform an executable (Reset, Test,
Enter, Start/Stop) on front panel membrane. On/Off rocker
switch to turnn on power to the unit.
Intermittent – pulse duration adjustable
[0.1 seconds – 99hrs 59 mins.] or continuous processing time
40 kHz
93 to 132 VAC@ 50/60 Hz (North American and Japan)
182 to 264 VAC @ 50/60 Hz (CE and non CE units available)
150 Watts
Operating: 41°F (5°C) to 104°F (40°C).
Storage and shipping: -20°F (-29°C) to 158°F (70°C)
Factory set, no tuning necessary. No user-accessible adjust-
ments.
8A. 250 V fast acting, 5 x 20 mm
100-120VAC, 50/60 Hz, 2A; 200-240VAC, 1A
Chapter 5: Technical Specifications
Technical Specifications
5-1