Extron electronics AXI 02 AT User Manual page 20

Tools
Presets — Contains a submenu to mark
1
and clear all elements in the main workspace
as well as an option to save marked
elements to a preset (see
page 11).
Connect to/Disconnect from Device
2
— When in Emulate mode, this option
reads Connect to Device and opens
the Connect to Device... dialog box
(see Connecting Live to a Device
page 12). When in Live mode, this reads
Disconnect from Device and returns the
software to Emulate mode.
Device Manager — Opens the Device Manager dialog box. Click the help icon
3
) in the top right corner of the dialog box to view the Device Manager topic for
(
more information on using the Device Manager.
Issue RESET Command — Clears all gain settings, attenuation settings, and presets for
4
the AXI. This command does not reset general settings such as device name or Dante
network configuration.
Firmware Loader — Opens the Firmware Loader application if it is installed (see
5
the Firmware Loader Help file for help updating firmware). Visit
download Firmware Loader.
Device Settings — Opens the Device Settings dialog box to edit the device
6
name and view the network configuration. Click the help icon (
of the dialog box to view the Device Settings topic for more information.
Options — Opens the Options dialog box to configure DSP Configurator Software
7
appearance and default settings. Click the help icon (
dialog box to view the Options topic for more information.
Network Audio Control — Opens Dante Controller by Audinate for routing audio
8
over a Dante network (see
installed in order for the application to be opened. Visit
Dante Controller.
Window
Cascade — Organizes windows by
1
cascading them in the same order they were
opened.
Close All Windows — Closes all open
2
windows, leaving only the main workspace
visible. When windows are closed, changes
to any of the parameters in the open
windows are saved before the windows are closed.
List of Open Windows — Below the dividing line in the menu is a list of all open
3
windows. Select a window from the list to bring it into focus and to the forefront of the
workspace. Windows appear in the order they were opened.
1
Presets on
2
3
4
5
6
on
7
8
Dante Controller on page 15). Dante Controller must be
1
2
3
AXI 02 AT • DSP Configurator Software
www.extron.com
) in the top right corner
) in the top right corner of the
www.extron.com to download
to
10