Table of Contents
Advertisement
1. GETTING STARTED
What's In The Box?
• 1 x MAX L™ LED Strobe
• 1 x IEC Power Cord
• 1 x Mounting Bracket & Locking Knobs
Getting It Out Of the Box
Congratulations on purchasing the multi-talented MAX L™: color strobe, blinder
and wash effect. Now that you've got MAX L™, you should carefully unpack
the box and check the contents to ensure that all parts are present and in
good condition. If anything looks as if it has been damaged in transit, notify
the shipper immediately and keep the packing material for inspection. Again,
please save the carton and all packing materials. If a fixture must be returned
to the factory, it is important that the fixture be returned in the original factory
box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch.
Warning! All fixtures must be connected to circuits with a suitable
Ground (Earthing).
Getting A Hold Of Us
If something goes wrong, please visit www.blizzardpro.com/support
and open a support ticket. We'll be happy to help, honest.
Disclaimer: The information and specifications contained in this document are
subject to change without notice. Blizzard Lighting™ assumes no responsibility
or liability for any errors or omissions that may appear in this user manual.
Blizzard Lighting™ reserves the right to update the existing document or to
create a new document to correct any errors or omissions at any time. You can
download the latest version of this document from www.blizzardpro.com.
Author:
J. Thomas
MAX L™ User Manual - Rev. A
Date:
9/23/2020
Page 3
Last Edited:
J. Thomas
Date:
12/28/2020
© 2020 Blizzard Lighting, LLC
Advertisement
Table of Contents
