Figure 2-9: Finish The Software - Analog Devices ADSP-21992 EZ-KIT LITE Manual

12. Click Finish to exit the wizard.
13. Verify the installation by following the instructions in section 2.4.5.
2.4.4.2 Windows 2000 USB Driver Installation
Before using the ADSP-21992 EZ-KIT Lite for the first time, the Windows 2000 driver must first
be installed. This is accomplished as follows:
1. Insert the VisualDSP++ CD-ROM into the CD-ROM drive.
The connection of the device to the USB port will activate the Windows 2000 Found New
Hardware Wizard as shown in
ADSP-21992 EZ-KIT Lite Evaluation System Manual
Figure 2-9: Finish the Software Installation
Figure 2-10.
2-15