Monitor Input And Output Interfaces - Hisense HME8C55S User Manual

INPUT2 Press this button to configure signal sources for each window.
INPUT1
Film Clip Enable and select a film clip mode.
Image
mode

Power switch
It is used to power on and off the LCD monitor.
It takes more than 5s to restart the monitor, so that the system can be completely reset after power
failure.

Monitor Input and Output Interfaces

Interface Function
Software upgrade
interface
DVI signal
interface
DP signal input interface DP (DisplayPort 1.2)
VGA signal
interface
Monitor Components and Connectors
Press this button to select the signal source of a window.
When a single window is displayed, the signal source shortcut menu is
displayed.
When multiple windows are displayed, the window selection menu is displayed.
After you select a window, the signal input shortcut menu is displayed after 3s.
When a single window is displayed, the Image Mode shortcut menu is displayed.
When multiple windows are displayed, the window selection menu is displayed.
After you select a window, the Image Mode shortcut menu is displayed after 3s.
Power switch
Connector Description
Select Upgrade1, Upgrade2, Upgrade3, or Upgrade4 based on chips for
upgrade.
input
DVI1, DVI2, DVI3, and DVI4
input
VGA
10