Hisense HME8C55S User Manual page 4

rise. In this case, turn on the monitor after the condensation disappears; otherwise, the monitor will
be damaged.

Do not cover or block any ventilation holes on the device housing. When the monitor is installed in
a closet or other closed environments, keep a certain gap between the monitor and sides of the
closet.

In order to avoid changes in brightness due to long-term use and maintain a stable brightness, we
recommend that the monitor be used at a slightly lower brightness.

Keep the high-frequency electrotome away from this monitor, and cables or devices connected to
this monitor. The high-frequency electrotome, when turned on, may interfere with nearby devices.
Interference may activate the OSD menu of the monitor, thereby affecting the monitor function.
The image display may be abnormal due to interference, affecting the viewing effect.

It is recommended that you clean the LCD monitor exterior periodically to extend its service life.

Do not clean or maintain the monitor when it is powered on. Remove the monitor power cable for
cleaning or maintenance.

Do not modify the monitor without authorization of the manufacturer.

It is strongly recommended that you prepare a backup monitor for important tasks.

If you do not need to use the monitor for a long time, disconnect the monitor from the power
socket to avoid damage to the monitor caused by transient voltage.

To completely power off the monitor, remove the power plug from the power socket.
Description and Maintenance of the LCD monitor
Preventive maintenance is not required. However, the monitor needs to be regularly maintained
to make the monitor in the optimal state and run securely. It is recommended that you check the
monitor function and safety regularly, for example, at least once every year.

The screen is a key component of the LCD monitor and requires periodic maintenance.

Do not squeeze the edges of the LCD monitor or frame. Failure to comply may cause display
failure.

Do not touch or press the monitor with sharp objects, which may cause damage to the screen.

Do not use organic solvents such as alcohol and gasoline, or chemical reagents such as acid and
alkali to contact the housing or monitor, which may lead to gloss reduction, fading, and image
quality reduction of the housing or monitor.

Do not clean the monitor housing or screen with any diluent, benzene, wax, and abrasive cleaning
agent that may damage the monitor housing and screen.

It is recommended that the surfaces of the monitor housing and panel be cleaned with special
screen cleaning cloth.

When necessary, after the monitor is shut down, wet a small piece of clean soft cloth with water,
and properly clean the housing and monitor to remove the dirt on the surface gently.
Important Information
Safety Information and Precautions
III