Polaris PVCR 1028 WI-FI IQ Home Operation Manual page 33

VACUUM CLEANER RESET TO ORIGINAL WIFI SETTINGS:
Make sure your vacuum cleaner is not standing on the base. Do the following with a delay of no more than 3
seconds:
Press and hold the button until you hear a beep. Release the button and wait for the Wi-Fi indicator to flash
quickly.
Press and hold the button again until you hear a beep. Release the button and wait for the Wi-Fi indicator to
flash slowly.
Press and hold the button for the third time until you hear a beep. Release the button and wait for the device
to reboot for about 20 seconds.
VACUUM CLEANER FEATURES COVERED IN APPENDIX
(detailed description of features and peculiarities of the appliance operation is given in the following
chapter).
1. Start/ stop
2. Remote control of motion direction (joystick)
3. Operation mode selection:
a. Auto
b. Perimeter cleanup
c. Spiral (spot vacuuming)
d. Return to the base
4. Cleanup scheduling per days of the week
5. Battery charge indication
6. Setting the suction power intensity
7. Room cleaning card
8. Displaying of errors during the appliance operation
Note: The set and names of the functions available in the application may change without notice to the
user when the version of the application and the firmware of the device change.
Additional functions of the application
1. Quick Launch Toolbar: on the device page in the application, there is a panel with four cells at the bottom
for quick launch of selected programs and modes. To place any mode you like in this panel, just hold down
its button and drag it to the panel without releasing your finger.
2. Control of access rights to the device: to activate the rights control, you need to go to the device page in
the app, click the settings symbol ("asterisk") in the upper right corner, select "Rights control" and turn the
switch "Enable rights control" to the "On"position. After that, you automatically become the administrator of
the device with full access rights to it, all other users get the "View" access level. You can define a personal
access level for each user. All new users who will connect to the device after you have activated the rights
control function on it will receive the "View" access level and will not be able to manage the device until
you or another device administrator gives this user the appropriate management rights.
3. Ability to share the device: You can simply share the control of your device with anyone who has the
Polaris IQ Home app installed. To do this, you need to go to the device page in the app, click on the settings
symbol ("asterisk") in the upper right corner, select "Rights Control" and click on the "Share" symbol in the
upper right corner.. After that, you will see the QR code of this device on the screen.
In order for the receiving party to scan this QR code, it needs to click the "New device" button on the main
screen of the application and click on the scanner icon in the upper-right corner in the window that appears.
Then you need to point the phone's camera at the QR code provided by the transmitting party and follow the
prompts of the system.
33