Polaris PVCR 1028 WI-FI IQ Home Operation Manual page 30

Download application Polaris IQ Home
You can also download thew application by the link to web-site www.polar.ru in the section dedicated
to this version of vacuum cleaner.
This application enable you to:
 Register your robot
 Set a cleanup schedule, start, stop, or cancel vacuuming cycles
 Adjust vacuuming settings
 Trace the vacuuming progress
 Name your robot
 Get access to the appliance adjustment guidelines
 Find answers to FAQ
 Automatically update software
 Contact the support service.
The vacuum cleaner Wi-Fi network connection setup
Attention: Prior to connecting to Wi-Fi network, install the vacuum cleaner on the charge base in
avoidance of failure due to the battery discharge during setup.

Plug the charge base into a power network through the standard adapter.

Set the switch on the vacuum cleaner to the position I.

Open application Polaris IQ Home in your mobile device.
Important! Always download a firmware update for the device if the application prompts you to do so.
For phone with operating system Android:
New appliance configuration

The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-1028) in the "All Appliances" list
to your phone.
30