Polaris PVCR 1028 WI-FI IQ Home Operation Manual page 32


The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-1028) in the "All Appliances" list

Click on "Continue"

The application prompts you to establish connection with WiFi-network "PVCR-1028", click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the button
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of WiFI
network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
Pairing a previously configured appliance:

The "Home" screen: click on "Add Appliance".

Look through the "Next to You" list to select the vacuum cleaner (PVCR-1028) (If the appliance in
absent, make sure your mobile device is connected to the WiFi network the applicance is configured
for).

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the button
2. Then click on "Continue" in the application
The appliance reconfiguration for another Wi-Fi network (diagnostics mode):

Make sure your vacuum cleaner is not standing on the base. Do the following with a delay of no more than
3 seconds:

Press and hold the button
to flash quickly.

Press and hold it again until you hear a beep. Release the button
flash slowly.

Click on "New Appliance" on the "Home" screen.

Select the vacuum cleaner (PVCR-1028) in the "All Appliances" list.

Click on "Continue"

The application prompts you to establish connection with WiFi-network "PVCR-1028", click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the button
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of WiFI
network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
until you hear a beep. The Wi-Fi indicator will flash quickly.
until you hear a beep. The Wi-Fi indicator will flash quickly.
until you hear a beep. Release the button
until you hear a beep. The Wi-Fi indicator will flash quickly.
32
and wait for the Wi-Fi indicator
and wait for the Wi-Fi indicator to