Table of Contents
Advertisement
TROUBLESHOOTING
8. Troubleshooting
8.1. Tool Functions Are Not Available
If the tool functions are not available (grayed out) in the program, return to the Installation tab
> URCaps > Device info and then back to the program.
8.2. Error During Operation
If an error occurs during operation, try the following:
1. Restart the robot and check the functionality.
2. If the error is still present, contact the distributor from where the product has been
purchased.
30
Advertisement
Table of Contents
Need help?
Do you have a question about the Gecko SP1 and is the answer not in the manual?
Questions and answers