Recording A Track - Datavideo HDR-45 Quick Start Manual

Recording a track

Press the Video Input Button so that it is illuminated. You should see the video source on your output monitor
Use the Next / Previous Buttons to select an empty track from the HDR-45 track list, one that shows a duration of
00:00:00:00 in the LCD display.
Press both the Record and Play/Pause Buttons simultaneously and the HDR-45 should start recording.
+
If it does not start recording check the following:
There is an video input present.
The Video Input Button is illuminated
The track you have selected on the HDR-45 is empty. The counter next to the TrackNo on the LCD display should b
showing 00:00:00:00.
There is some available space on the HDR-45 Hard Disk - Go to the FREE SPACE Menu and check that the HDR-45
is not full.
During record you can pause the HDR-45 by pressing the Play/Pause button, the counter on the LCD display will stop.
To release pause press the Play/Pause button again.
N.B. It is not possible to stop recording and then restart on the same track, once a track has been stopped
you must select a new empty track from the HDR-45 to start recording again.
Not suitable - Track
has been recorded
The counter should stop counting and the REC PAUSE symbol
should appear
The counter should start counting again and the REC symbol
should return
The counter should start counting and the REC
symbol should appear
21
Suitable - Track is
empty