NEC UNIVERGE DT920 Series User Manual page 33

TO SET TIME FORMAT
The procedure below shows how to set time display with a 12-
hour or 24-hour clock format.
1.
Press Menu key while terminal is in an idle state.
□
2.
Select 1 User Settings.
□
3.
Select 3 Display.
□
4.
Select 1 Calendar Format.
□
5.
Select 2 Time Format.
6.
Select desired setting from the following list.
No. Menu Item
0 Automatic
1 12 hour Indication
2 24 hour Indication
■When selecting Automatic or not performing this time
format setting, 12-hour clock is automatically applied.
■Default setting is Automatic.
■The enabled item is highlighted.
Meaning
Follows the setting on the
system (default)
12-hour clock
24-hour clock
TO ENABLE/DISABLE VOLUME GAUGE
The procedure below shows how to display the volume levels:
handset receiver volume, speaker volume, ringer tone volume
and LCD contrast.
1.
Press Menu key while terminal is in an idle state.
□
2.
Select 1 User Settings.
□
3.
Select 3 Display.
□
4.
Select 2 Local Volume.
5.
Select desired setting from the following list.
No. Menu Item
Automatic
0
1 Disable
2 Enable
The enabled item is highlighted.
33
TERMINAL SETUP
Meaning
Each volume gauge is displayed on
LCD (default).
Each volume gauge is not displayed on
LCD.
Each volume gauge is displayed on
LCD.