NEC UNIVERGE DT920 Series User Manual page 46

Character Entry Method
As an example of character entry method, the
following shows how to enter "Ken Kobus".
1.
Press the [5] key twice to enter "K".
2.
Press the [＊] key to switch the text input mode
from uppercase to lowercase.
3.
Enter "en" by using digit keys.
Press the [3] key twice to enter "e".
Press the [6] key twice to enter "n".
4.
Press the [0] key once to enter a space.
5.
Press the [＊] key twice to switch the text input
mode from lowercase to uppercase.
6.
Press the [5] key twice to enter "K".
7.
Press the [＊] key twice to switch the text input
mode from uppercase to lowercase.
8.
Enter "obus" by using digit keys.
Press the [6] key three times to enter "o".
Press the [2] key twice to enter "b".
Press the [8] key twice to enter "u".
Press the [7] key four times to enter "s".
9.
Press the Enter key or the OK soft key.
46
TERMINAL SETUP