To Edit The Registered Data - NEC UNIVERGE DT920 Series User Manual

TO EDIT THE REGISTERED DATA

To Enter the Phone Number
1.
Locate the cursor (underscore) with LEFT/RIGHT
soft key (these soft keys are displayed pressing
the ">>>" soft key), or pressing LEFT/RIGHT key.
2.
Enter the desired phone number.
If the entered number exceeds 24 digits, the digits
following the 24th digit are displayed on the upper row of
the LCD. A phone number can be entered up to 32 digits.
To Enter Hooking
1.
Press the Hook soft key (this soft keys is
displayed pressing the ">>>" soft key twice).
2.
Hooking is indicated as "!" on the LCD.
The Hook soft key can be put only at the beginning of a
number, and so "Hooking" displays only before entering
any number.
To Enter Pause
1.
Press the Pause soft key (this soft key is
displayed pressing the ">>>" soft key twice).
2.
Pause is indicated as "-" on the LCD.
Up to three consecutive entries of the "Pause" are
allowed.
To Enter Voice Call
1.
Press the VOICE soft key (this soft key is
displayed pressing the ">>>" soft key twice).
2.
Pause is indicated as "V" on the LCD.
To Delete the Entered Character
1.
Place the cursor (underscore) in front of the
desired character with the LEFT/RIGHT soft key
(these soft keys are displayed pressing the ">>>"
soft key), or pressing the LEFT/RIGHT key.
2.
Press the Clear soft key.
To Delete the Phone Number Data
1.
Press the DEL soft key (this soft key is displayed
pressing the ">>>" soft key twice).
2.
Press the OK soft key.
3.
The following message appears for 3 seconds.
"Entry is deleted"
When this process ends in failure, "Delete Failed!" is
displayed for 3 seconds on the LCD.
To Delete the Number of One-Touch Speed
Calling Keys Using SPDSET Key
1.
Press the SPD setting key.
2.
Press the desired One-Touch Speed Calling key.
3.
Press the DEL soft key.
4.
Press the OK soft key.
5.
The following message appears for 3 seconds.
"Entry is deleted"
When this process ends in failure, "Delete Failed!" is
displayed for 3 seconds on the LCD.
To Switch the Registering One-Touch
Speed Calling Keys Using SPDSET Key
1.
Press the SPD setting key.
2.
Press the desired One-Touch Speed Calling key.
3.
The phone
displayed.
4.
Press another One-Touch Speed Calling key to
switch the key data.
57
FEATURE OPERATION
number already registered is