DOK-CONTRL-S20*PSDO*8*-AP02-EN-P
IndraControl S20 Module With Safe Digital Outputs S20-PSDO-8/3
14.2
Assembly and electrical installation
Device type/equipment identification
Version: HW/FW
Editor
Remark
No. Requirement (mandatory)
1
Was assembly completed according to the specifications (specifications
from the planning phase or according to the application description)?
2
Was the module installed in the control cabinet (IP54) and secured cor-
rectly?
3
Do the cable cross sections and installation correspond to the specifica-
tions?
4
Does the connection technology correspond to the specifications in the
technical data and in the relevant application description?
No. Requirement (optional)
5
Is the data width set correctly according to the specifications?
6
Is the profile/PROFIsafe address set correctly according to the specifi-
cations?
Checklist for assembly and electrical installation of the module
Date
Test engineer
Yes
Remark
Yes
No Remark
Date
Signature (editor)
Date
Signature (test engineer)
Bosch Rexroth AG
71/82
Checklists