Bosch Rexroth IndraControl S20 Manual page 60

58/82 Bosch Rexroth AG
Technical data and ordering data
General data [...]
Connection data for IndraControl S20 connectors
Connection method
Conductor cross section
Supported stop category according to EN 60204
Mechanical requirements
Vibration according to IEC 60068-2-6
Shock according to IEC 60068-2-27
Safety characteristic data according to EN 61508
Achievable SIL
Probability of a dangerous failure on demand by the safety
function (PFD)
Probability of a dangerous failure per hour for the entire
module (PFH)
Hardware fault tolerance (HFT) of the module
Permissible duration of use
Safety characteristic data according to EN 62061
Achievable SIL claim limit
Safe failure fraction (SFF)
Probability of a dangerous failure per hour for the entire
module (PFH)
Hardware fault tolerance (HFT) of the module
Permissible duration of use
DOK-CONTRL-S20*PSDO*8*-AP02-EN-P
IndraControl S20 Module With Safe Digital Outputs S20-PSDO-8/3
Spring-cage terminal blocks
2
Solid: 0.5 mm ...1.5 mm
Stranded without sleeve: 0.25 mm
Stranded with sleeve: 0.25 mm
24 AWG ... 16 AWG
0
1 in error-free state
10 Hz ... 57 Hz: 0.35 mm with constant amplitude
57 Hz ... 150 Hz; 5g acceleration, constant amplitude
30g over 11 ms, Criterion A
SIL 2 (single-channel)
SIL 3 (two-channel)
Depends on the parameterization and wiring: see
tion options for actuators depending on the parameterization"
on page 14, see "Connection examples for safe outputs" on
page 33.
-2
SIL 2: 1% of 10 , maximum (corresponds to 1 x 10
-3
SIL 3: 1% of 10 , maximum (corresponds to 1 x 10
-6
SIL 2: 1% of 10 , maximum (corresponds to 1 x 10
-7
SIL 3: 1% of 10 , maximum (corresponds to 1 x 10
Depends on the parameterization: see
page 35.
1
20 years, 25 years with a low demand rate
SILCL = SIL 2 (single-channel)
SILCL = SIL 3 (two-channel)
Depends on the parameterization and wiring: see
options for actuators depending on the parameterization" on
page 14, see "Connection examples for safe outputs" on
page 33.
99%
-6
SIL 2: 1% of 10 , maximum (corresponds to 1 x 10
-7
SIL 3: 1% of 10 , maximum (corresponds to 1 x 10
Depends on the parameterization: see
page 35.
1
20 years, 25 years with a low demand rate
2
2 2
... 1.5 mm
2 2
... 1.5 mm
"Connec-
-4
)
-5
)
-8
)
-9
)
"SIL, SILCL" on
"Connection
-8
)
-9
)
"SIL, SILCL" on