Bosch Rexroth IndraControl S20 Manual page 28

26/82 Bosch Rexroth AG
Assembly, removal, and electrical installation
Inserting and removing
the connector
IndraControl S20 Module With Safe Digital Outputs S20-PSDO-8/3
C
A
B
A
DOK-CONTRL-S20*PSDO*8*-AP02-EN-P
Insert
• Place the connector vertically in its po-
sition.
Note the color markings of connec-
tors/slots.
Assignment from left to right:
blue, red, white, green.
• Press firmly on the connector. Make
sure that the locking latch snaps in.
Remove
• Release the locking latch (A).
• Tilt the connector upwards slightly (B).
• Remove the connector from the mod-
ule (C).