I-Parameters - Bosch Rexroth IndraControl S20 Manual

66/82 Bosch Rexroth AG
F-Parameters and i-Parameters
13.2

i-Parameters

iPar_CRC
IndraControl S20 Module With Safe Digital Outputs S20-PSDO-8/3
The i-Parameters are individual module parameters. These include:
• Module parameters: see
on page 30.
• PST-Device_ID (device type ID)
The module parameters are verified with a checksum: iPar_CRC.
DOK-CONTRL-S20*PSDO*8*-AP02-EN-P
Chapter 6.2 "Parameterization of the safe outputs"