JRC JLN-900 Installation And Instruction Manual page 9

Speed log
Table of Contents

Advertisement

7.
When to stop cardiopulmonary resuscitation (CPR)
a) When the injured or ill person has been handed over to the
emergency services
b) When the injured or ill person has started moaning or breathing
normally, lay him/her on his/her side in a recovery position and wait
for the arrival of emergency services.
8. Arrival and preparation of an AED
a) Place the AED at an easy-to-use position. If there are multiple first-aiders, continue CPR until
the AED becomes ready.
b) Turn on the power to the AED unit.
Depending on the model of the AED, you
may have to push the power on button, or the
AED automatically turns on when you open
the cover.
c) Follow the voice prompts of the AED.
9. Attach the electrode pads to the injured or ill person's bare chest
a) Remove all clothing from the chest, abdomen, and arms.
b) Open the package of electrode pads, peel the pads off and securely
place them on the chest of the injured or ill person, with the adhesive
side facing the chest. If the pads are not securely attached to the
chest, the AED may not function. Paste the pads exactly at the
positions indicated on the pads, If the chest is wet with water, wipe dry
with a dry towel and the like, and then paste the pads. If there is a
pacemaker or implantable cardioverter defibrillator (ICD), paste the
pads at least 3cm away from them. If a medical patch or plaster is
present, peel it off and then paste the pads. If the injured or ill person's
chest hair is thick, paste the pads on the chest hair once, peel them off
to remove the chest hair, and then paste new pads.
c) Some AED models require to connect a connector by following voice prompts.
d) The electrode pads for small children should not be used for children over the age of 8 and for
adults.
vii
Turn on the power.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents