Control Unit, Ncm-1180 - JRC JLN-900 Installation And Instruction Manual

12.4 Control Unit, NCM-1180

The Control Unit is used to access the NWW-82 Main Display buttons from a remote
position.
Menu LP5 EXTERNAL INPUTS shall be set to [SDR2] for the remote control to
function correctly (See 6. Set-up of Display
Note! The Control Unit is not intended for e.g. calibration and only for the NWW-82
Main Display.
12.4.1 Installation
Display
Terminal 6
Terminal 7
Terminal 8
Terminal 9
Terminal 10
Trip/
Mode WT
Total
é Co n s i l i u m
Control Unit Function
Terminal 1 Control Unit (IN 1)
Terminal 2 Control Unit (IN 2)
Terminal 3 Control unit (IN 3)
Terminal 4 Not used
Terminal 5 0 VDC
Terminal 6 10..32 VDC (12 to 24 VDC nominal)
Test
Press
2 sec
Reset
-
Trip
DIM
113
144
7-28
+
U/N 704130