Water Track U Menus - JRC JLN-900 Installation And Instruction Manual

Below follows an example of a menu walk in the R0 REMOTE DEV menu:
R0 REMOTE DEV
CONNECT
Press Enter to search for remote devices
R0 REMOTE DEV
CONNECT

4.4 WATER TRACK U menus

The function of each menu in the WATER TRACK U is defined below.
4.4.1 Root Menu
This is the "default" menu, which is shown when entering the menu system. If left in any other
menu, the system will return to this menu after 5 minutes of idling.
R nn.nn C nn.nn
Cnnn Mnn Qnnn Sn
or
R nn.nn C nn.nn
Cnnn Jnn Qnnn Sn
or
R nn.nn C nn.nn
Cnnn Mnn Dnnn Sn
SYNCHRONISING
(counting down from 3)
Wait 3 seconds while all available devices are found. Press Menu to see
next available remote device in list if more than one device is found.
R2 DEVICE 1 OF 2
WTU 1 (R1A)
Or press Enter to enter menu system of displayed device
R 10.42 C 10.67
C765 J1 Q558 S4
The root menu in WATER TRACK U will now be displayed in
the NWW-82 Display Mode window.
To go deeper into WATER TRACK U menu system, press
Menu.
To exit back to local mode in the NWW-82 Display, press Esc.
The Esc button will always step out of the remotely controlled
menu system.
Press [Esc] to go back to the list of accessible remote devices
R2 DEVICE 2 OF 2
LPU 1 (LP1)
Press Esc to go back into NWW-82 Display local menu system
10-12