JRC JLN-900 Installation And Instruction Manual page 191

4.2.4 Saving menu content
4.2.5 Menu function summary
No Access Name
Level
MM (NORMAL
OPERATION)
A0 Internal PSALW
All Users
diagnostics
A101 ES SIMULATION
All Users
A110 All Users ES ALARM TEST
A140 POWER SUPPLY
All Users
LOW
A201 SOG SIMULATION
All Users
A205 T2R MASTER FAIL
All Users
A210 SOG Phase Roll
All Users
A220 SOG Sig Balance
All Users
When saving menu content by pressing ENTER, the following menu
appears for one second:
Aa FUNCTION
SAVE OK
or, when unsuccessful:
Aa FUNCTION
SAVE FAIL
before returning to the normal menu text. NOTE: A save fail may depend
on a busy flash memory and thus further save attempts may resolve the
problem.
If read-only access has been selected, the "no write access" text appears
for one second and the write operation is inhibited:
Aa FUNCTION
NO WRITE ACCESS
The list is included for fast indexing.
Menus with access level "All users" are directly accessible.
NOTE: Menus with access level "Authorised expert" must be unlocked
and should only be used by trained service personnel. Note that some
non-default combinations of menu values may result in strange behaviour
of the SAL T-series speed log / echo sounder system.
Default Range / info
speed info
presented
NORMAL /
ACTIVE /
ACTIVE ACK
9-5
Function
Timeout to normal operation after
180 seconds. Displayed
presentation according to chapter
"Normal operation".
Number of active and
acknowledged diagnostic codes,
intended for service use
Diagnostic code depth simulation
status
Diagnostic code ES Test Alarms
status
Diagnostic code (transmitter) Power
Supply Low status
Diagnostic code speed over ground
simulation status
Diagnostic code T2R Master Fail
status (slave T2R / JP26)
Diagnostic code Phase Roll test
status
Diagnostic code SOG Signal
Balance test status