Menu Function Summary - JRC JLN-900 Installation And Instruction Manual

5.5

Menu function summary

No. Name
Display- LOCAL
LP0 PROPERTIES
LP1 SD4 TYPE
SD4- [ ]
LP2 MODE WINDOW
LP2.01 DIST WATER
LP2.02 TRIP WAT-L
LP2.03 TRIP WAT-T
LP2.04 TRIP WATER
LP2.05 DIST GROUND
LP2.06 TRIP GND-L
LP2.07 TRIP GND-T
LP2.08 TRIP GROUND
LP2.09 DIST+TRP WAT
LP2.10 DIST+TRP GND
LP2.11 TRIP WAT+GND
LP2.12 SPEED SOG-L
LP2.13 SPEED SOG-T
LP2.14 SPEED SOG
LP2.15 SPEED STW-L
LP2.16 SPEED STW-T
LP2.17 SPEED STW
LP2.18 DEPTH (ESD)
SENSOR: No offset
KEEL: Negative offset
SURF: Positive offset
LP2.19 DEPTH (LOG)
LP2.20 ROT
Default setting Function
SD SD SD
4-2 4-3 4-4
BASIC MENU
Select properties menu
2 3 4 Sets type of SD4 display
SD4-2(Main Display), -3, -4
(factory setting)
List of information to be displayed
in the MODE WINDOW:
ON ON OFF Total distance counter of STW
(resulting)
OFF OFF OFF
Trip distance counter of STW
longitudinal
OFF OFF OFF Trip distance counter of STW
transverse
ON ON OFF Trip distance counter of STW
(resulting)
OFF OFF OFF
Total distance counter of SOG
(resulting)
OFF OFF OFF Trip distance counter of SOG
longitudinal
OFF OFF OFF Trip distance counter of SOG
transverse
ON OFF OFF Trip distance counter of SOG
(resulting)
OFF OFF OFF DIST WAT and TRIP WAT
are displayed simultaneously
OFF OFF OFF DIST GND and TRIP GND
are displayed simultaneously
OFF OFF OFF TRIP WAT and TRIP GND
are displayed simultaneously
OFF OFF OFF SOG longitudinal
OFF OFF OFF SOG transversal
OFF OFF OFF SOG (resulting)
OFF OFF ON
STW longitudinal
OFF OFF OFF STW transversal
OFF OFF OFF STW (resulting)
OFF OFF OFF Depth from Echo sounder display
with offset according to $SDDPT
message.
$SDSTN Id displayed if available
OFF OFF OFF Depth from speed log. (not to be
used for navigation)
OFF OFF OFF Rate-of-Turn (only available if a
gyro is connected to the system)
7-14