Safety - R&S NGA100 Series Getting Started

®
R&S NGA100
Risk of radio interference
This is a class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.
EMI impact on measurement results
Electromagnetic interference (EMI) may affect the measurement results.
To suppress the generated EMI:
●
Use suitable shielded cables of high quality, for example, LAN cables
●
Note the EMC classification in the data sheet
● Safety................................................................................................................ 9
● Intended Operation..........................................................................................11
● Unpacking and Checking the
● Setting Up the
3.1

Safety

Recommendations on secure operation
The R&S NGA100 is designed to operate at local workplaces or in secured
networks (LAN). It should not be accessible from the internet, because of a
potential security risk, e.g. attackers could misuse or damage your device.
Please always install the latest firmware.
It is highly recommended that you work closely with your IT department or
system administrator to ensure compliance with your company policies
when connecting devices to your company's network.
This instrument was built in compliance with DIN EN 61010-1 (VDE 0411 part 1),
safety regulations for electrical instruments, control units and Iaboratory equip-
ment. It has been tested and shipped from the plant in safe condition. It is also in
Getting Started 5601.8902.02 ─ 06
Instrument........................................................ 13
Instrument............................................................................... 14
Putting into Operation
Safety
9