R&S NGA100 Series Getting Started page 20

®
R&S NGA100
1 = Display
2 = Function keys
3 = Rotary knob and arrow keys
4 = Output channels (see
5 = USB connector
6 = Power key
Display (1)
The display is a color LCD screen. Depending on the instrument models, up to
two channels are shown on the screen. The respective measurement settings
and functions are displayed in the individual channel section. There is a status
bar above the channel section to indicate the functions used and operation mode
of the instrument.
For a detailed description on-screen layout, see section "Screen Layout" in the
User Manual.
Function keys (2)
Function keys are means of input for manual operation of the instrument func-
tions. When a function key is pressed, all the related keys are also illuminated.
For detailed description on function keys, see section "Function Keys" in the User
Manual.
Rotary knob and arrow keys (3)
Rotary knob and arrow keys are means of navigation and adjustment. When
pressed or rotated, they perform tasks like navigation around the screen, adjust-
ment of parameter values or confirmation of entries.
For detailed description on rotary knob and arrow keys, see section "Navigation
Controls" in the User Manual.
Output channels (4)
Depending on the instrument models, up to two output channels are available for
output of power to the connected load. See
USB connector (5)
USB Type-A connector is provided for connecting a USB flash drive to perform
firmware update, data logging and store screen captures.
The USB flash drive file system supports FAT32 only.
Getting Started 5601.8902.02 ─ 06
Table 4-1)
Overview of Controls
Table 4-1.
Instrument Tour
17