Table of Contents
Advertisement
PPTP
users
Enter your user name and password provided by your ISP.
Obtain an IP address automatically: Set the WAN interface as a DHCP
client that will ask for the IP network settings from the DHCP server or
PPTP-enabled DSL modem.
Specify an IP address: If you are not sure whether there are any DHCP
services
on the WAN interface, you can manually assign an IP address to
the interface. Note that the IP
assigned within the same network as the PPTP-enabled DSL modem.
Static
IP
Enter the static (fixed or permanent) IP address that your ISP offers to you.
WAN IP address: this is the IP address assigned by your ISP for your
router. You shall specify the IP address of the router here, e.g.
172.16.2.84
Quick Start Wizard
Address and Subnet Mask should be
1-4
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2100 Series and is the answer not in the manual?