Table of Contents
Advertisement
Management Setup
The port number used to send/receive SIP message for building a
session. The default value is 5060 and this must match with the peer
Registrar when making VoIP calls.
Enable remote
firmware update
Allow management
from the Internet
Disable PING from the
Internet
Access List
You could specify that the system administrator can only login from a
specific host or network defined in the list. A maximum of three
IPs/subnet masks is allowed.
IP
Subnet Mask
Management Port Setup
Default Ports
User Defined Ports
System Maintenance Setup
Chick the checkbox to allow remote firmware upgrade
through FTP (File Transfer Protocol).
Enable the checkbox to allow system administrators to
login from the Internet. By default, it is not allowed.
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by
default.
Indicate an IP address allowed to login to the router
Represent a subnet mask allowed to login to the router.
Check to use standard port numbers for the Telnet and
HTTP servers.
Check to specify user-defined port numbers for the
Telnet and HTTP servers.
10-8
Advertisement
Table of Contents
