Access Control
Broadband Access: Select Enable to turn on the broadband access
capability.
Keep WAN Connection
Enable PING to keep alive: If you specify "Enable PING to keep
alive" function, the router will periodically check your Internet
connection. The router will automatically re-establish the connection
if the connection is down.
Dynamic IP environment. Here will ignore the settings.
WAN IP Network Settings
Specify an IP address
IP address
Subnet Mask
Gateway IP Address
DNS Server IP address
Internet Access Setup
Normally, this function is used for
If your ISP offers you a static (fixed or permanent)
IP address, you have to enable "Specify an IP
address".
This is the IP address assigned by your ISP for
your router. You shall specify the IP address of
the router here. e.g. 172.16.2.84.
An address code that determines the size of the
network; this is the subnet mask of the router,
when seen by external users on the Internet
(including your ISP). (Default: 255.255.255.0/ 24)
An IP address forwards Internet traffic from your
local area network (LAN), e.g. 172.16.2.5.
You must specify a DNS server IP address here
because your ISP will at least provide you with at
least one DNS Server IP address. If you do not
specify it, the router will automatically apply default
DNS Server IP address: 194.109.6.66 to this field.
The Domain Name System (DNS) functions
how the Internet translates domain or website
names into Internet addresses or URLs.
3-5