Data Filter
Check Enable to activate the Data Filter function. Assign a start filter
set for the Data Filter.
Log Flag
For troubleshooting needs you can specify the filter log here.
The log function is inactive.
None
Block
All blocked packets will be logged.
Pass
All passed packets will be logged.
No Match
The log function will record all packets that are matched.
The filter log will be displayed on the Telnet terminal when you type
the "log -f" command.
MAC Address for Packet Duplication
Logged packets may also be logged to another location via Ethernet.
If you want to duplicate logged packets from the router to another
network device, you must enter the other devices' MAC Address
(HEX Format). Type "0" to disable the feature. The feature will be
helpful under Ethernet environments.
Firewall Setup
6-8