Table of Contents
Advertisement
System Maintenance Setup
Click the Browse button to locate the new firmware file. The program
will look for any Vigor routers on your LAN and display them by IP
address. Select the 'IP address' of the appropriate router to upgrade,
then press Upgrade. Enter the router's password when asked (or
press OK if there is no password). The upgrade action will start and
the status will be shown on the progress bar. Once the upgrade
operation has completed, wait approximately 30 seconds and the
router will be ready (ACT light in the front panel of your router will
resume flashing normally).
10-10
Advertisement
Table of Contents
