10.2.7
Reboot System
The Web Configurator may be used to restart your router. Click
Reboot System in the main menu to open the following page.
If you want to reboot the router using the current configuration, check
Using current configuration and click OK. To reset the router
settings to default values, check Using factory default
configuration and click OK. The router will take 5 seconds to reboot
the system.
10.2.8
Firmware Upgrade (TFTP)
Before upgrading your router firmware, you need to install the Router
Tools. The Firmware Upgrade Utility is included in the tools. The
following steps will guide you to upgrade firmware. In the following,
we use an example to explain the firmware upgrade. Note that this
example is running over Windows OS (Operating System).
1. Download the newest firmware from DrayTek' s web site or FTP
site. The DrayTek web site is
web site) and FTP site is ftp.draytek.com
2. Click System Maintenance>> Router Firmware Upgrade Utility to
launch the Firmware Upgrade Utility.
System Maintenance Setup
www.draytek.com
10-9
(or local DrayTek' s