Draytek Vigor2100 Series User Manual page 37

Residential broadband router
Hide thumbs Also See for Vigor2100 Series:
Table of Contents

Advertisement

For NAT Usage: (Default: Always Enable)
IP Address: Private IP address for connecting to a local private
network (Default: 192.168.1.1).
Subnet Mask: An address code that determines the size of the
network; this is the subnet mask of the router, when seen by
external users on the Internet (including your ISP).
(Default: 255.255.255.0/ 24)
DHCP Server Configuration
DHCP stands for Dynamic Host Configuration Protocol. The router
by factory default acts a DHCP server for your network. The router
can hence automatically dispatch related IP settings to any local user
configured as a DHCP client.
It is highly recommended that you leave the router enabled as a
DHCP server if you do not have a DHCP server for your network.
Please refer to the following picture for DHCP Server Configuration.
LAN Setup
4-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor2100gVigor2100vVigor2100vg

Table of Contents