Enable Wireless LAN
Check the box to enable wireless function.
Mode
Select an appropriate wireless mode.
- Mixed (11b+11g): The radio can support both IEEE802.11b and
IEEE802.11g protocols simultaneously.
- 11g-only: The radio only supports IEEE802.11g protocol.
- 11b-only: The radio only supports IEEE802.11b protocol.
Scheduler
Set the wireless LAN to work at some time interval only. You may
choose up to 4 schedules from the 15 schedules which are defined
under Advanced Setup > Call Schedule Setup. Please refer to the
detailed manual on the attached CD. The default setting is always
working.
SSID and Channel
The default SSID is "default". We suggest you change it to a
particular name. In this case, SSID was changed to "DrayTek".
- SSID (Service Set Identifier): It is used to name the wireless LAN,
and must have the same content in client PC/notebook wireless
Wireless LAN Setup
9-3