Atto Xstreamcore Overview; Atto Xstreamcore Fc 7550 Features, Benefits - ATTO Technology XstreamCORE FC 7550 Installation And Operation Manual

The ATTO XstreamCORE 7550/7600 is an intelligent Bridge that connects multiple shelves of SAS and SATA JBOD storage and virtualizes it to
a Fibre Channel SAN Connection.
The ATTO XstreamCORE FC 7550/7600 allows IT departments
to architect storage systems with the flexibility to use
standard interface off-the-shelf storage hardware with
increased bandwidth and low latency levels which improve
performance and response. As a Data Center building block,
the 7550/7600 allows IT managers to architect their storage
solution on their terms, avoiding vendor lock-in with

ATTO XstreamCORE FC 7550 features, benefits

The ATTO XstreamCORE FC 7550 is a 16-Gigabit Quad Fibre
Channel to 12-Gigabit SAS intelligent Bridge configured with
four independent 16Gb Fibre Channel ports and four 12Gb x4
SAS connectors.
Designed to integrate industry-leading performance and SAN
capabilities into the future generation of storage solutions,
the XstreamCORE FC 7550 uses a high-performance
architecture suited for OEMs looking to incorporate SAS or
SATA disk storage devices in their Fibre Channel SAN.
•
Four independent 16Gb Fibre Channel ports which
auto-negotiate to 4Gb, 8Gb or 16Gb Fibre Channel
•
Ability to aggregate up to 4 hosts without an external
switch
•
SFP+ Fibre Channel modules included
•
Dual Power Supply
•
Integrated xCore Acceleration Processor
•
Data Mover technology
•
Integrated eCORE Offload Processor

ATTO XstreamCORE Overview

modularity at each layer. The 7550/7600 is used to aggregate
and virtualize storage on a SAN (Storage Area Network) and
has undergone qualifications with industry leading storage
and SAN infrastructure products. The 7550/7600 is easily
integrated into IT infrastructures, providing lower operational
costs with tools like Drive Map Director™ and XstreamVIEW™.
•
SpeedWrite™ technology improves write
performance to tape drives by up to 20% over SAS
tape drives connected via SAS HBAs
•
Full support for FC-Fs, FCP-3
•
Support for direct connect to F-port switches
•
Four independent 12Gb SAS/SATA x4 mini-SAS HD
connectors which auto-negotiate to 3Gb, 6Gb or
12Gb
•
Automatic LUN Mapping
•
Patented Drive Map Director™ reduces operating
expense by auto-configuring storage
•
6,000 MB/s throughput for 256KB transfers
•
1,100,000 IOPS for 4KB read transfers and 700,000
IOPS for 4KB write transfers
•
XstreamVIEW™ integrated management console for
remote configuration, management and diagnostic
capabilities
•
Supports SAS/SATA hard disk drives, SSDs, optical
devices (DVD, CD) and Tape
•
Supports Host Group Mapping