ATTO Technology XstreamCORE FC 7550 Installation And Operation Manual page 19

E 9 E
XHIBIT VENTS TRIGGERING
Severity
Event
Level
Aborted Warning
Command
Device Info
Transition
Fibre Channel Info
Loop Down
Fibre Channel Info
Loop Up
Hardware Error Critical
Illegal Request Info
Medium Error Warning
Power Supply Critical
Down
Temperature Info
Temperature Warning
Temperature Critical
Unit Attention Info
Unit Power On Info
SNMP
NOTIFICATION FOR EXTENDED OR STANDARD TRAP GENERATION
Extended Extended
Traps Traps
disabled enabled
No Yes
No Yes
Yes Yes
Yes Yes
No Yes
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
A command has been aborted.
A target device has failed, become offline or come online.
A loop down event on a Fibre Channel port has occurred.
A loop up event on a Fibre Channel port has occurred.
An unrecoverable target device failure.
An illegal SCSI request has been attempted.
A command terminated with an error condition that may have been
caused by a flaw in the target device's physical medium or its recorded
data.
A power supply has powered down or was down after unit power-up.
The unit's internal temperature has increased or decreased to within
standard operating ranges.
Unit's internal temperature has increased to at or within the unit's
maximum operating temperature less the unit's temperature warning
offset or decreased to at or within the unit's minimum operating
temperature plus the unit's temperature warning offset.
Unit's internal temperature has increased to at or above the maximum
operating temperature or decreased to at or below the minimum
operating temperature.
A unit attention condition has occurred.
The unit has been powered up.
,
SEVERITY LEVEL AND EXPLANATION
Explanation