Appendix B Cli Provides Ascii-Based Interface - ATTO Technology XstreamCORE FC 7550 Installation And Operation Manual

Hide thumbs Also See for XstreamCORE FC 7550:

Installation and operation manual (42 pages)

Table of Contents

The command line interface (CLI) provides access, configuration, and monitoring for ATTO XstreamCORE services through a set of ASCII

commands. CLI commands may be entered through a serial port connection, active telnet session, or the Advanced page on the

XstreamVIEW GUI.

CLI commands are context sensitive and generally follow a standard format:

[Get|Set] Command [Parameter1|Parameter2] followed by the return or enter key

CLI commands are case insensitive: you may type all upper or all lower case or a mixture. Upper and lower case in this manual

and the help screen are for clarification only.

Commands generally have three types of operation: get, set and immediate.

The get form returns the value of a parameter or setting and is an informational command.

Responses to get commands are followed by Ready.

The set form is an action that changes the value of a parameter or configuration setting. It may require a SaveConfiguration

command and a restart of the system before it is implemented. The restart can be accomplished as part of the SaveConfiguration

command or by using a separate FirmwareRestart command. A number of set commands may be issued before the

SaveConfiguration command.

Responses to set commands are either an error message or Ready. *. The asterisk indicates you must use a SaveConfiguration

command to finalize the set command. SaveConfiguration asks if you want to restart the system or not.

Immediate commands are set commands which are executed right away and do not require a Save Configuration command.

Responses to Immediate commands are either an error message or data results followed by Ready.

Symbol

sasConn

16 S

XHIBIT

YMBOLS

TYPEFACES AND ABBREVIATIONS USED TO INDICATE FUNCTIONS AND ELEMENTS OF THE COMMAND LINE INTERFACE USED IN

THIS MANUAL