Atto Xstreamcore Fc 7600 Features, Benefits - ATTO Technology XstreamCORE FC 7550 Installation And Operation Manual

ATTO XstreamCORE FC 7600 features, benefits

The ATTO XstreamCORE FC 7600 is a 32-Gigabit Quad Fibre
Channel to 12-Gigabit SAS intelligent Bridge configured with
two independent 32Gb Fibre Channel ports and four 12Gb x4
SAS connectors.
Designed to integrate industry-leading performance and SAN
capabilities into the future generation of storage solutions,
the XstreamCORE FC 7600 uses a high-performance
architecture suited for OEMs looking to incorporate SAS or
SATA disk storage devices in their Fibre Channel SAN.
•
Two independent 32Gb Fibre Channel ports which
auto-negotiate to 8Gb, 16Gb or 32Gb Fibre Channel
•
Ability to aggregate up to 2 hosts without an external
switch
•
SFP+ Fibre Channel modules included
•
Dual Power Supply
•
Data Mover technology
•
Integrated eCORE Offload Processor
•
SpeedWrite™ technology improves write
performance to tape drives by up to 20% over SAS
tape drives connected via SAS HBAs
•
Full support for FC-Fs, FCP-3
•
Support for direct connect to F-port switches
•
Four independent 12Gb SAS/SATA x4 mini-SAS HD
connectors which auto-negotiate to 3Gb, 6Gb or
12Gb
•
Automatic LUN Mapping
•
Patented Drive Map Director™ reduces operating
expense by auto-configuring storage
•
6,000 MB/s throughput for 256KB transfers
•
1,100,000 IOPS for 4KB read transfers and 700,000
IOPS for 4KB write transfers
•
XstreamVIEW™ integrated management console for
remote configuration, management and diagnostic
capabilities
•
Supports SAS/SATA hard disk drives, SSDs, optical
devices (DVD, CD) and Tape
•
Supports Host Group Mapping