Note:
If you selected the link "Click here if you are on the local network and reopen in this frame", the browser will
not have the "Add Exception" button. We recommend using the first link when connecting to the new unit for
the first time. After the initial setup, you may find it more convenient to use the second link and open
configuration interface inside the frame.
By clicking "Add Exception" the following screen is opened:
The browsers issue with the VortexInst certificate is that it is an IP address instead of a site name like myBank.org. You
may view the certificate by clicking "Confirm Security Exception" and this certificate will be stored in your browser.
The next time the browser knows which certificate to use for this IP. If you change the IP address of the meter, you'll
need to go through this procedure again.
With other browsers, the procedure may be slightly different. However, you will need to repeat the steps to confirm
the certificate for each browser.
PanaFlow™ MV80, MV82 & MV84 User's Manual
Figure 73: Fire Fox Add Exception
Figure 74: FireFox Add Security Exception
Chapter 2. Installation
59
Need help?
Do you have a question about the PanaFlow MV80 and is the answer not in the manual?