3.5.12 The Time & Date Menu - Panametrics PanaFlow MV80 User Manual

3.5.12 The Time & Date Menu
Use the Time and Date Menu (see Figure 106 below) to enter the correct time and date into the flow meter's memory.
The parameters are used in the Run Mode and the alarm and system log files.
Note: Time is displayed in AM/PM format, but military format is used to set the time. For example, 1:00 PM is entered
as 13:00:00 in the Set Time menu.
This example shows how to set the time to 12:00:00. You can check the time in Run Mode by pressing the
until the Time & Date screen appears.
Note: All outputs are disabled while using the Setup Menus.
1. Use keys to move to the Time and Date Menu.
key until Set Time appears. Press ENTER.
2. Press the
3. Press the key until 1 appears. Press the
2 appears. Continue sequence until all desired parameters are entered. Press ENTER to return to the Time and
Date Menu.
Press EXIT to return to Run Mode.
4.
PanaFlow™ MV80, MV82 & MV84 User's Manual
ENTER
Run Mode
Figure 106: The Time & Date Menu
key to move the underline cursor to the next digit. Press the
Password
ENTER
Use
Menu
keys to access menus
Set Time
xx:xx:xx
Set Date
xx/xx/xx
Chapter 3. Operating Instructions
keys
key until
91