Panametrics PanaFlow MV80 User Manual page 86

Chapter 3. Operating Instructions
3.2 Flow Meter Display/Keypad (cont.)
ENTER
EXIT
PanaFlow™ MV
Figure 94: Magnetic Keypad Operation
Figure 95 below shows a picture of the display/keypad. From Run Mode, the ENTER key enables access to the Setup
Menus through a password screen. Within the Setup Menus, pressing ENTER activates the current field. To set new
  
parameters, press the ENTER key until an underline cursor appears. Use the
keys to select new parameters.
  
The keys advance through each screen of the current menu. When changing a system parameter, all
  
keys are available to enter new parameters. Press ENTER to continue.
All outputs are disabled when using the Setup Menus. If changes are not allowed, ENTER has no effect.
Note:
The EXIT key is active within the Setup Menus. When using a Setup Menu, EXIT returns you to the Run Mode. If you are
changing a parameter and make a mistake, EXIT enables you to start over.
Figure 95: Flow Meter Display/Keypad
74 PanaFlow™ MV80, MV82 & MV84 User's Manual