Examples Of Timer Programming - Jeio tech Lab Companion SK-300 Operating Manual

Cancel of
specific
timer
Example of
Programming
shaking mode
Example of
Time input
6) Cancelation of Timer Programming
1. Press SHAKER/SET Button to go on the desired section.
 A related section LED is on.
2. Press ENTER Button.
 After finishing cancelaton, A related section is off.

2. Examples of Timer programming

1) Total program time + F/WARD + PAUSE
1.¡Shaking control using ofTimer fuction¡1)Input Total program Time.
2.¡Shaking control using ofTimer fuction¡2)Input F/WARD Time.
3.¡Shaking control using ofTimer fuction¡
3) Do not Input B/WARD Time, Press SHAKER/SET Button to go on the
next section.
4. ¡Shaking control using ofTimer fuction¡4) Input PAUSE Time.
5. Press START/STOP
F/WARD,PAUSE LED is on
2) Example of Timer Input
After finishing the timer of Total program time, the shaker stops rotating.
Input Total program time and then select B/WARD,F/WARD,PAUSE to input.
* Example of Timer
1. Total program Time + F/WARD
2. Total program Time + B/WARD
3. Total program Time + F/WARD + PAUSE
4. Total program Time + B/WARD + PAUSE
5. Total program Time + F/WARD + PAUSE + B/WARD
3) Input rotating time
When Total program time doesn¡t input, the shaker keeps operating by
rotating time. Select B/WARD,F/WARD,PAUSE to input.
* Example of Timer
1. F/WARD
2. B/WARD
3. F/WARD + PAUSE
4. B/WARD + PAUSE
5. F/WARD + PAUSE + B/WARD
button to operate after checking TIMER,
Page 23