Time for
Clockwise
rotation
Time for
Anticlockwise
rotation
2) Programming Forward time
1. Press SHAKER/SET key.
This section is for setting Time Forward.
¡For.S¡ shown on MODE display.
2. Press UP/DOWN key to set Time and then press ENTER
key to store the value.
(Max Input Time: 10 seconds~ 59 minutes 59 seconds)
After setting the value, F/WARD LED is ON.
3. If not use F/Ward function, do not press Enter key.
3) Programming Backward time
1. Press SHAKER/SET key.
This section is for setting Time Backward.
¡bAc.S¡ shown on MODE display.
2. Press UP/DOWN key to set Time and then press ENTER
key to store the value.
(Max Input Time: 10 seconds~ 59 minutes 59 seconds)
After setting the value, B/WARD LED is ON.
3. If not use B/Ward function, do not press Enter key.
Page 21