Safety Caution - Jeio tech Lab Companion SK-300 Operating Manual

Safety Caution

Do not put heavy things on the power line. Do not put the machine on the line.

It causes fire and electric shock.
Connect the plug correctly and do not touch it with wet hands.

It can cause fire if the connection is not fit.
It can cause fire and damage to users.
Do not make the machine wet while cleaning. Do not put liquid on the machine.

If the machine is wet, off the power and contact where you purchase the machine to
check it.
Do not shock the machine or vibrate it.

It can cause damage to the machine.
Do not clean the machine with solvent abstergent. Use smooth cloths.

Cleaning with solvent can cause fire and deformity.
Do not touch the shaking table while the machine is operated

Stop the machine by using Start/Stop button and do necessary works.
Do not put anything near to the turning radius of the machine while operation.

Turning radius of the machine is from 20mm to70mm.
Do not put the sample in a flask installed shaking table.

It can cause damage to the machine.
Be sure to pull out the flask from the shaking table to put the sample in and then,
install the flasks.
Do not put the sample over the max scale shown on the flask.

It can prevent from overflowing the sample When the machine operates in max rpm.
Page 16
¡Notice¡ shows that users can be wounded
or machines broken by wrong operation.